Honda ATC 350X Flat Tracker | ATV Rider

Honda ATC 350X Flat Tracker

FST/ Mickey Dunlap’s Latest


Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

The gas tank was cut to allow tight turning. They used Honda 85' 250r radiator scoops and mounted two oil coolers where the radiator would be on a water cooled engine.

ATV Rider

Honda’s short lived ATC 350X was the fastest four stroke trike you could buy. Their popularity really never took off since the quads became more popular back in the day. However, today the four stroke fans consider them very sought after for race or play.

Mickey Dunlap’s Four Stroke Tech is building them for customers as fast as they can be found. Here is the latest example of FST’s work to what was Hondas short lived ATC350X. You can get a hold of Four Stroke Tech at 814-842-6159 between 3-6:00 pm EST. Mon-Fri.

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

Custom adjustable levers and Vortex flat track bend handle bars helped clear the gas tank for the sharper turning.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

This was a custom build for Four Stroke Tech racer Bryan Ditch, nic name "Ditched" for Ditching the competition.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

Graphics were done by Blue Line Graphics to give it the CRF motorcycle look. The CRF number plate was used also. Front forks were shorten 2 inches to lower the front to match the rear.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

These are also FST's fiberglass low profile race fenders as they had back in the day for most models for back in the day. Black or White fenders are $235, $25 more for red plus shipping.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

A two inch longer Cal-Fab swing arm was used with a aftermarket 300ex plus 4 axle and a custom lowering kit for the Works Performance race shock.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

FST had .080 over 13:1 piston built, full race cam, valve springs and custom big valve head with a 450r carb custom built intake.

ATV Rider

Honda ATC 350X Flat Tracker

Honda ATC 350X Flat Tracker

Four Stroke Tech built this flat track 350x as they would have 30 years ago. Cost of parts to build this motor run about $1425 with big valve head porting.

ATV Rider

Latest


More Stories


Videos