How To: Polaris RZR XP 1000 Front Gearcase Fluid Change

Demand Drive Unit Specs & Step-By-Step Directions

The Polaris RZR XP 1000 drain plug is found on the bottom of gearcase with an access hole in the metal frame skidplate. Polaris Demand Drive Fluid must be used, do not substitute here.

Polaris RZR XP 1000 Gearcase Specification Chart
Gearcase Lubricant Capacity Fill Plug Torque Drain Plug Torque
Transmission AGL Gearcase Lubricant 44 oz. 10-14 ft. lbs 10-14 ft. lbs
Front Gearcase Demand Drive Fluid 8.5 oz. 8-10 ft. lbs 8-10 ft. lbs
How To: Polaris RZR XP 1000 Demand Drive Unit ( Front Gearcase) Fluid Directions:
1. Remove the fill plug, place a drain pan under the drain plug and remove drain plug.
2. Allow the fluid to drain completely, Clean the drain plug, if o-ring is damaged, replace it.
3. Reinstall the drain plug, torque to specification (8-10 ft. lbs.)
4. Add the recommended “Polaris Demand Drive Fluid” to the bottom thread of fill plug hole.
5. Reinstall the fill plug, Torque to spec. (8-10 ft. lbs)
6. Check for leaks and discard of used fluid properly.
ADVERTISEMENT